Home Page

AR.Pro 3 for Parrot Drones 1.5.1.4 - Google Play




About AR.Pro 3 for Parrot Drones

The Parrot Disco and Mambo+MiniCam are fully supported in addition to the Parrot Bebop V1 and V2 dronesl! AR.Pro 3 provides for remote control capabilities of Parrot Bebop V1, V2, and numerous other Parrot drones. It...

The Parrot Disco and Mambo+MiniCam are fully supported in addition to the Parrot Bebop V1 and V2 dronesl!

AR.Pro 3 provides for remote control capabilities of Parrot Bebop V1, V2, and numerous other Parrot drones. It exposes many of the same functions as Parrot’s own Freeflight application but implements a unique user experience and allows further customization of your drone.

Key Features (this list is always expanding):

* Parrot Flypad / PS3 / PS4 / NVidia Shield / iPega / MOGA gamepad support
* Intuitive Piloting HUD
* Customized Wi-Fi settings including MAC filtering, WPA2 and hidden SSID
* Input Device Deadzone / Sensitivity tuning
* Combined Yaw / Roll Mixing
* Google / Bing / Here / arcGIS / etc Map Management
* Directed Flight plans
* Track Me Mode
* Waypoint Assisted flight plans
* MAVLINK TM Autonomous Flight Planner and Monitor
* Firmware Management for Bebop and Disco drones
* Full Sky Controller V1 and V2 Integration
* Remote Media Management (includes Flight Data and PNG files)
* Google Cardboard (VR) Mode
* Head Controlled Camera Panning
* Manual Connection options
* Minidrone including Mambo+MiniCam support
* Mambo accessories (claw + gun) support
* Full Parrot Disco support including Flight Plan

INSTRUCTIONS FOR CONNECTING TO YOUR MAMBO+MINICAM w/ Flypad:

Start AR.Pro 3 and stay in the Discovery activity.
Power on your Flypad and wait for its light to go solid green.
If you go into the AR.Pro 3 Settings activity, you’ll find a header for managing the flypad axes and button mappings.
Return to (or stay in the Discovery activity).
Power on your Mambo+MiniCam
AR.Pro 3 may prompt you asking if you wish to connect to the Mambo via Bluetooth. Answer NO.
After 30-60 seconds the Mambo’s Wi-Fi SSID will show up in your Wi-Fi network list pulldown.
Select the Mambo Wi-Fi network from the list once it appears.
Now back at the Discovery activity, wait 15-30 seconds for AR.Pro 3 to connect to your Mambo’s Wi-Fi.
Once connected (Settings gears no longer turning) you can enter AR.Pro 3’s Piloting activity.
If the video stream doesn’t show immediately (it’s black) it is because the MiniCam went into low power mode.
Launch / Takeoff and you’ll find the video stream starts up (if it is not already visible).

I’ll be working on button / axes mappings when the Flypad is connected directly to the Mambo in the coming weeks. Documentation updates are also underway.

AR.Pro 3 will never offer in-app purchases. Once you have purchased AR.Pro 3 you will benefit from all future enhancements without ever having to buy any additional (addon) features / functions.


Portions Copyright (C) 2007-2016, PARROT SA, all rights reserved

DISCLAIMER

The APIs is provided by PARROT and contributors "AS IS" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall PARROT and contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

Further details about Parrot's terms and conditions can be found here: http://www.parrot.com/us/terms-conditions/

Further details about Shell M. Shrader's terms and conditions can be found in the Change Log bundled with AR.Pro 3.



Previous Versions

Here you can find the changelog of AR.Pro 3 for Parrot Drones since it was posted on our website on 2016-09-19 04:57:41. The latest version is 1.5.1.4 and it was updated on 2024-04-23 09:23:44. See below the changes in each version.

AR.Pro 3 for Parrot Drones version 1.5.1.4
Updated At: 2018-09-30
Changes: * Upgrade your firmwares! * Added option to cold boot GPS for Bebop v1 drones * Fixed RTH Altitude adjustment (Requires Telnet) * Fixed External Storage Management (Requires Telnet) * Moved RTH Delay to Flight Settings * Updated the AR.Pro 3 Manual (check General Settings) * Additional safeguards for Flypad / Gamepad * Various other bug fixes
AR.Pro 3 for Parrot Drones version 1.4.7.2
Updated At: 2018-01-07
Changes: * Upgrade your firmwares! * Numerous bug fixes and tweaks
AR.Pro 3 for Parrot Drones version 1.3.1
Updated At: 2016-08-19
Changes: * See Change Log


Related Apps

Here you can find apps that are similar with AR.Pro 3 for Parrot Drones.



Disclaimer

Official Google Play Link


We do not host AR.Pro 3 for Parrot Drones on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.

The Google Play link for AR.Pro 3 for Parrot Drones is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.

If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.

BarCode2D-PNG


Click stars to rate this APP!

Users Rating:  
  0.0/5     0
Downloads: 88
Updated At: 2024-04-23 09:23:44
Publisher: Shell M. Shrader
Operating System: Android
License Type: Free Trial